STUDI LITERATUR KAITAN ANTARA REKAYASA KEBUTUHAN DAN REKAYASA SISTEM

Abstract

Abdullah, A.A. & Khan, H.U., 2015. FreGsd: A Framework for Global Software Requirement Engineering. JSW, 10 (10), pp.1189-1198.

Ahmad, J.A., 2014. Rekayasa sistem informasi Akademik sekolah berdasarkan Kurikulum 2013 dengan menggunakan Framework Codeigniter. Edu Komputika Journal, 1 (1), pp.22-23.

Anonim. Penerapan model Kano dalam analisis persayatan proyek konsultasi perusahaan Y.

Bertero, A., Silvestre, L., & Bastarrica, M.C., 2012. T2m and m2t transformations between software processes and software process models. In: IEEE (Institute of Electrical and Electronics Engineers), 31st International Conference of the Chilean Computer Science Society (pp. 36-40).

Budiarso, Z., Hadikurniawati, W., & Prihandono, A. 2014. Rekayasa Sistem Kendali Generator Sinyal XR-2206 Berbasis Arduino UNO R3. Dinamik, 19 (2), pp. 101-111.

Cristian, Ruf, 2015. Towards an Artifact-Oriented Requirements Engineering Model for Developing Successful Products, Services, and Systems: Identification of Model Requirements. In: AISeL (Association for Information Systems Electronic Library), 28th Bled eConference. Bled, Slovenia, 7-10 Juni 2015.

Distopandaru, D. & Siahaan, D.O., 2012. Rekayasa kebutuhan dan desain sistem e-procurement perusahaan jasa konstruksi dengan pendekatan structured system analysis and design method (SSADM). In: Seminar Nasional Manajemen Teknologi XVI. Surabaya, Indonesia, 14 Juli 2014.

EIA-632-1998 (R2003)-processes for engineering a system. Electronic Industries Alliance.

Fitri, R., Subandi, S., & Hastuti, I., 2019. Analisis Rekayasa Kebutuhan Perangkat Lunak Menggunakan Smart Requirement Dalam Membangun Sistem Informasi Lomba Karya Tulis Ilmiah Politeknik Negeri Banjarmasin. In: Seminar Nasional Riset Terapan (Vol. 4, pp. A01-A10). Banjarmasin, Indonesia, 17 November 2019.

Hendrick, H. W., & Kleiner, B.M., 2001. Macroergonomics: An introduction to work system design. Human Factors and Ergonomics Society.

Hendrik. H., & Kleiner, B.M., 2002. Macroergonomics : Theory, methods, and Applications 1st edition. Lawrence Erlbaum Associates.

Holt, J., Perry, S., Payne, R., Bryans, J., Hallerstede, S., & Hansen, F.O., 2014. A model-based approach for requirements engineering for systems of systems. IEEE Systems Journal, 9 (1), pp.252-262.

Hussain, A., Mkpojiogu, E.O., & Kamal, F.M., 2015. Eliciting user satisfying requirements for an e-health awareness system using kano model. In: 14th International Conference On Applied Computer And Applied Computational Science (ACACOS'15), Kuala Lumpur, Malaysia, 23-25 April 2015.

Innab, N., Kayed, A., & Sajeev, A.S.M., 2012. An ontology for software requirements modelling. In: 2012 IEEE International Conference on Information Science and Technology. Hubei, China, 23-25 Maret 2012.

Jackson, S., 2001. 1.5. 1 The C‐17 and BC‐17X: Systems Engineered Transport Aircraft for the World. In: INCOSE International Symposium (Vol. 11, No. 1, pp. 716-722), Melbourne, Australia, 1-5 Juli 2001.

Jackson, S., Simpson, M.J., Atkinson, C., Mathers, G., Simpson, J.J., Duurland, E., & Jain, A., 2000. 8.6. 1 Towards the Development of Domain‐Specific Guidelines for a Systems Engineering Framework: Commercial Aircraft. In: INCOSE International Symposium (Vol. 10, No. 1, pp. 831-838), Minneapolis, Amerika Serikat, 16-20 Juli 2000.

Karsh, B.T., & Alper, S.J., 2005. Work system analysis: the key to understanding health care systems. Advances in patient safety: from research to implementation, 2, pp.337-348.

Kosasi, S., & Kuway, S.M., 2012. Studi Analisis Persyaratan Kebutuhan Sistem Dalam Menghasilkan Perangkat Lunak Yang Berkualitas. SISFOTENIKA, 2 (1), pp.1-10.

Laplante, P.A., 2007. What every engineer should know about software engineering. CRC Press.

Lardeur, E., Bocquet, J.C., & Auzet, C. (2003). Using systems engineering to enhance concurrent engineering environment through modelling problematic. In: International Conference of Concurrent Enterprising (Vol. 9). Espoo, Finlandia, 17-19 Juni 2003.

Leong S.C., Chua Y.P.A., 2018. A System Engineering Approach For Solving The Train Signal Interference Problem. Anonym.

Lewenusa, I., 2017. Rekayasa Kebutuhan perangkat lunak pada perusahaan skala kecil dan menengah dengan pendekatan Soft Sytem Methodology (SSM) - Studi Kasus PT XYZ. Journal of Computer Science and Information Systems, 1 (1), pp.49-57.

Magdalena, H., Santoso, H., & Sahara, W., 2019. Rekayasa Sistem Pendukung Keputusan dalam Lomba Desa Tingkat Kabupaten dengan Metode Analytical Hierarchy Process. Fountain of Informatics Journal, 4 (2), pp.49-60.

Maryono, D., 2018. Teknologi Informasi dan Komunikasi untuk Kelas X. GLOBAL.

Messadia, M., Eljamal, M.H., & Sahraoui, A.E.K., 2005. Systems Engineering Process Deployement for PLM. In: International Conference on Product Lifecycle Management, Lyon, Prancis, 11-13 Juli 2005.

M., Kassab, 2015. The changing landscape of requirements engineering practices over the past decade. In: 2015 IEEE Fifth International Workshop on Empirical Requirements Engineering (EmpiRE) (pp. 1-8). Ottawa, Kanada, 24 Agustus 2015. IEEE.

M.S., Saeed, Sarwar, N., & Bilal, M., 2016. Efficient requirement engineering for small scale project by using UML. In: 2016 Sixth International Conference on Innovative Computing Technology (INTECH). Dublin, Irlandia, 24-26 Agustus 2016. IEEE.

M.F., Abulamddi, 2017. A Survey of Approaches Reconciling between Safety and Security Requirements Engineering for Cyber-Physical Systems. Journal of Computer and Communications, 5 (1), pp.94-100.

Munif, N., & Siahaan, D.O., 2012. Rekayasa Kebutuhan Untuk Perbaikan Sistem Disaster Recovery Plan Dengan Pendekatan Metodologi Security Quality Requirements Engineering (SQUARE). In: Seminar Nasional Manajemen Teknologi XVI, Surabaya, Indonesia, 14 Juli 2012.

Osman, N., 2018. A Software Requirement Engineering Framework to Enhance Critical Success Factors for ERP Implementation. International Journal of Computer Applications, 180 (10), pp.32-37.

Osman, N., 2018. From PLM to ERP: A software systems engineering integration. International Journal of Software Engineering & Applications (IJSEA), 9 (1), pp.11-27.

Pasmore, W.A., 1988. Designing effective organizations: The sociotechnical systems perspective (Vol. 6). New York: John Wiley & Sons Inc.

R., Bullard, Colombi, J., & Freeman, G.R., 2008. Global positioning system: a case study focused on systems engineering. In: IEEE, 2008 19th International Conference on Systems Engineering. Las Vegas, Amerika Serikat, 19-21 Agustus 2008.

Rivera, A.J., & Karsh, B.T., 2008. Human factors and systems engineering approach to patient safety for radiotherapy. International Journal of Radiation Oncology* Biology* Physics, 71 (1), pp.S174-S177.

Sadila, N.M., Pradana, F., & Priyambadha, B. 2017. Rekayasa Kebutuhan dengan Metode Pemodelan Berbasis Linguistik dan Ontologi pada Sistem Penilaian Prestasi Kerja Pegawai Dinas Kominfo Kota Malang. Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer e-ISSN, 1 (9), pp.765-773.

Sulistiyani, E., & Yulianingtyas, S.H., 2019. Identifikasi Karakteristik Teknik Elisitasi Pada Rekayasa Kebutuhan Perangkat Lunak: Sebuah Review Sistematis. SISFO, 8 (3), pp.141-158.

SwissQ, C., 2012. SwissQ Requirements Trends & Benchmarks Switzerland. SwissQ Consulting.

Saaty, T.L., & Vargas, L.G., 2012. Models, methods, concepts & applications of the analytic hierarchy process (Vol. 175). 2nd ed. New York: Springer Science & Business Media.

Saaty, T.L., 2013. Better world through better decision making. In International Symposium on the Analytic Hierarchy Process 2013. Kuala Lumpur, Malaysia, 23-26 Juni 2013.

Zafar, U., Bhuiyan, M., Prasad, P.W.C., & Haque, F., 2018. Integration of Use Case Models and BPMN Using Goal-Oriented Requirements Engineering. Journal of Computer (JCP), 13 (2), pp.212-221.